Click image to view full size image
Etross 1200P Asterisk PCI analog card
Brand: Etross
Model: 1200P
1200P is 12 channels FXS/FXO analog Asterisk PCI card which is mainly applied to PSTN environment. It supports all functions of Asterisk PBX systems needed.
Features:
High security: It adopts tertiary thunder preventing technology, and can prevent the thunder and lightning from striking effectively. Extensive applicability: Any global standard interface of phone line is available. Users can choose any of combinations of FXO_200, FXS_200 or FSO_200 Modulesaccording to their requirements.
32 bit bus master DMA data exchanges across PCI interface at132Mbytes/sec For minimum host processor intervention. The high stability of firmware is exported / imported with DMA data exchange, So it lightens CPU's load greatly. Under the environment of the same hardware, The application rate of CPU is equal to 4 channels analog card. It supports all functions of Asterisk PBX systems needed.
Safe designed: No weld legs are on the backside of our module. Smooth bottom Module couldn't hurt user's fingers. However, most of modules use dual - In- line so that smart weld leg on the backside of module.
Working hardware and software:
Interface: PCI 2.2 CPU 800+MHz RAM 128+MB Linux kernel 2.4. X or 2.6. X
Size and Weight:
Size(L*W*H): 214*105*24MM
Weight: 256g
Workingenvironment:
Temperature Operation: 0 to 70° C Temperature Storage: -35° C to 120° C
Humidity: 10% to 90% Non-condensing
Voltage: 5V/12V
Power Dissipation Mas: 3.67W/36.58W
PC Power(Recommended): >=300W
Disclaimers: Digium® Is registered trademark of Digium, Inc Asterisk® Is registered trademark of Digium, Inc.
Brand: Etross
Model: 1200P
1200P is 12 channels FXS/FXO analog Asterisk PCI card which is mainly applied to PSTN environment. It supports all functions of Asterisk PBX systems needed.
Features:
High security: It adopts tertiary thunder preventing technology, and can prevent the thunder and lightning from striking effectively. Extensive applicability: Any global standard interface of phone line is available. Users can choose any of combinations of FXO_200, FXS_200 or FSO_200 Modulesaccording to their requirements.
32 bit bus master DMA data exchanges across PCI interface at132Mbytes/sec For minimum host processor intervention. The high stability of firmware is exported / imported with DMA data exchange, So it lightens CPU's load greatly. Under the environment of the same hardware, The application rate of CPU is equal to 4 channels analog card. It supports all functions of Asterisk PBX systems needed.
Safe designed: No weld legs are on the backside of our module. Smooth bottom Module couldn't hurt user's fingers. However, most of modules use dual - In- line so that smart weld leg on the backside of module.
Working hardware and software:
Interface: PCI 2.2 CPU 800+MHz RAM 128+MB Linux kernel 2.4. X or 2.6. X
Size and Weight:
Size(L*W*H): 214*105*24MM
Weight: 256g
Workingenvironment:
Temperature Operation: 0 to 70° C Temperature Storage: -35° C to 120° C
Humidity: 10% to 90% Non-condensing
Voltage: 5V/12V
Power Dissipation Mas: 3.67W/36.58W
PC Power(Recommended): >=300W
Disclaimers: Digium® Is registered trademark of Digium, Inc Asterisk® Is registered trademark of Digium, Inc.