Click image to view full size image
Etross-800P is a 4 port FXS/FXO analog Asterisk PCI card which is mainly applied to PSTN environment. It supports all the functions of Asterisk PBX systems needed.
Features:
1. High security: It adopt tertiary thunder preventing technology, can prevent the thunder and lightning from striking effectively.
2. World Wide Usable: Configurable line interface to meet global telephone line interface requirements.
3. User could choose any of combinations of FXO_200 or FXS_200 modules according to their requirements.
4. 32 bit bus master DMA data exchanges across PCI interface at
132Mbytes/sec for minimum host processor intervention.
5. The high stability firmware is exported / imported with DMA data exchange, so it accelerated and reduced CPU load greatly. Under the environment of the same hardware, CPU rate of utilization is equal to CPU rate of utilization of using 4 port analog card.
6. It supports all the functions of Asterisk PBX systems needed.
7. Humanization is designed: The module socket that should be nipped is all adopted and stuck to one slice of sockets, can prevent stabing users finger effectively.
1. High security: It adopt tertiary thunder preventing technology, can prevent the thunder and lightning from striking effectively.
2. World Wide Usable: Configurable line interface to meet global telephone line interface requirements.
3. User could choose any of combinations of FXO_200 or FXS_200 modules according to their requirements.
4.32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
5. The high stability firmware is exported / imported with DMA data exchange, so it accelerated and reduced CPU load greatly. Under the environment of the same hardware, CPU rate of utilization is equal to CPU rate of utilization of using 4 port analog card.
6. It supports all the functions of Asterisk PBX systems needed.
7. Humanization is designed: The module socket that should be nipped is all adopted and stuck to one slice of sockets, can prevent stabing users finger effectively.
Quality Warranty: 1 Year
Hardware and software requirements:
1. Interface: PCI 2.2
2. CPU 800+MHZ
RAM 128+MB
Linux kernel 2.4. X or 2.6. X
Size and Weight
1. Size(L*W*H): 214*105*24MM
2. Wight: 256g
The environmental instructions for using:
1. Temperature Operation: 0 to 70° C
2. Temperature Storage: -35° C to 120° C
3. Humidity: 10% to 90% Non-condensing
4. Voltage: 5V/12V
5. Power Dissipation Mas: 3.67w/36.58w
6. PC Power(Recommended): >=300W
Disclaimers:
Digium? Is registered trademark of Digium, Inc
Asterisk? Is registered trademark of Digium, Inc
Features:
1. High security: It adopt tertiary thunder preventing technology, can prevent the thunder and lightning from striking effectively.
2. World Wide Usable: Configurable line interface to meet global telephone line interface requirements.
3. User could choose any of combinations of FXO_200 or FXS_200 modules according to their requirements.
4. 32 bit bus master DMA data exchanges across PCI interface at
132Mbytes/sec for minimum host processor intervention.
5. The high stability firmware is exported / imported with DMA data exchange, so it accelerated and reduced CPU load greatly. Under the environment of the same hardware, CPU rate of utilization is equal to CPU rate of utilization of using 4 port analog card.
6. It supports all the functions of Asterisk PBX systems needed.
7. Humanization is designed: The module socket that should be nipped is all adopted and stuck to one slice of sockets, can prevent stabing users finger effectively.
1. High security: It adopt tertiary thunder preventing technology, can prevent the thunder and lightning from striking effectively.
2. World Wide Usable: Configurable line interface to meet global telephone line interface requirements.
3. User could choose any of combinations of FXO_200 or FXS_200 modules according to their requirements.
4.32 bit bus master DMA data exchanges across PCI interface at 132Mbytes/sec for minimum host processor intervention.
5. The high stability firmware is exported / imported with DMA data exchange, so it accelerated and reduced CPU load greatly. Under the environment of the same hardware, CPU rate of utilization is equal to CPU rate of utilization of using 4 port analog card.
6. It supports all the functions of Asterisk PBX systems needed.
7. Humanization is designed: The module socket that should be nipped is all adopted and stuck to one slice of sockets, can prevent stabing users finger effectively.
Quality Warranty: 1 Year
Hardware and software requirements:
1. Interface: PCI 2.2
2. CPU 800+MHZ
RAM 128+MB
Linux kernel 2.4. X or 2.6. X
Size and Weight
1. Size(L*W*H): 214*105*24MM
2. Wight: 256g
The environmental instructions for using:
1. Temperature Operation: 0 to 70° C
2. Temperature Storage: -35° C to 120° C
3. Humidity: 10% to 90% Non-condensing
4. Voltage: 5V/12V
5. Power Dissipation Mas: 3.67w/36.58w
6. PC Power(Recommended): >=300W
Disclaimers:
Digium? Is registered trademark of Digium, Inc
Asterisk? Is registered trademark of Digium, Inc